Capiz shell chandelier can add sparkling beauty to any room, including a living room, bedroom or even the front door of a house. This style circular shell is available in various sizes and is white or almost white. Capiz shells adorned with lamps require the same installation process as any other type of chandelier. Once an existing chandelier an electrical box mounted on the roof is removed, the process of installing your new lamp is simple.
Turn off the power switch refers to the electrical box which squeezes the capiz shell chandelier. Once the computer is off, place a ladder or stepladder under light or existing lamp, remove the light from the electrical box, and separate the wires. Read the instruction manual Spider Capiz shell to determine your specific installation instructions. If so, stick to them; if not, install the chandelier as you would with any other light mounted on the ceiling.
12 Photos Gallery of: How to Hang Capiz Shell Chandelier
Capiz shell chandelier attaches the mounting bracket lamp to the electrical box through union with screws. Electrical boxes are a standard size and shape, so that the light bracket fits correctly. Connect the cables from the electrical box with cables lamp using thread in the electrical connectors. See instructions Spider for specific wiring information, but usually a black wire to the black wire and the white wire to white wire. If the lamp has a ground wire, which is often green, green loosen the screw in the electrical box, roll the tip of the wire around the screw and tighten the screw back down.